2018-2021 Yamaha YN 50 F Neos 4T E4 (2AC/SA611) 42mm Cylinder Piston Gasket Kit 60cc 3B3-E1311-00
SKU: 88687576583

2018-2021 Yamaha YN 50 F Neos 4T E4 (2AC/SA611) 42mm Cylinder Piston Gasket Kit 60cc 3B3-E1311-00

$35.79 $39.77
Save 10%
No.2 Bestseller on www.crpub.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 4 - Jul 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2018-2021 Yamaha YN 50 F Neos 4T E4 (2AC/SA611) 42mm Cylinder Piston Gasket Kit 60cc 3B3-E1311-0042mm Cylinder Piston Gasket Top End Rebuild Kit 60cc For MBK Booster Nitro Ovetto Yamaha Aerox Giggle 4T LC Features: If your cylinder blows through, the compression is too low, or even a piston seizure has occurred, then this kit is exactly the right thing for you. Kit includes cylinder, piston, rings, pin, clips & top end gasket kit (you get exactly what is pictured). Piston is anodized for superior heat resistance and longer lifespan. The gaskets

42mm Cylinder Piston Gasket Top End Rebuild Kit 60cc For MBK Booster Nitro Ovetto Yamaha Aerox Giggle 4T LC

Features:
If your cylinder blows through, the compression is too low, or even a piston seizure has occurred, then this kit is exactly the right thing for you.
Kit includes cylinder, piston, rings, pin, clips & top end gasket kit (you get exactly what is pictured).
Piston is anodized for superior heat resistance and longer lifespan.
The gaskets use performance materials to increase durability and provide greater reliability.
Includes all gaskets pictured to rebuild top end.
Kit is for bore up size - 42mm, 10mm steel piston pin.
The 42mm cylinder provides noticeably better pulling power compared to the 38mm original cylinder.
The cylinder is used with the original 38mm cylinder head.
It is not necessary to adapt the crankcase.
This kit is excellent as a low-cost replacement for defects in the original cylinder.

Specifications:
Condition: Aftermarket 100% Brand New
Quantity: 1 Set
Material: Aluminum
Displacement: 60cc
Engine: 4 stroke
Bore Type: Big Bore
Piston Type: 3 Valves
Bore diameter: 42mm
Stroke: 43.6mm
Pin diameter: 10mm
Pin Overall Length: 28mm

Replacement Part Number:
Cylinder: 3B3-E1311-00
Cylinder Base Gasket: 5ST-E1351-10
Cylinder Head Gasket: 10B-E1181-10
Piston (Std): 3B3-E1631-00, 5ST-E1631-00
Pin, Piston: 5ST-E1633-00
Piston Ring Set (Std): 10B-E1603-00
Circlips, piston (2): 93450-10823
Valve Stem Seal (2): 5ST-E2119-00
Tensioner Case Gasket: 4DH-E2213-01

Fits Make/Model/Year:
Big Bore cylinder kit with 60cc displacement for scooters with 50cc Minarelli 4-stroke engine.

Fit for MBK Booster X 50 4T
Fit for MBK Nitro 4 50 4T (1GB) 2014-
Fit for MBK Ovetto 50 4T (SA40) 2009-2012
Fit for MBK Ovetto 50 4T (2AC/SA46) 2013-
Fit for Yamaha YJ 50 Vino 4T E2 2002-2005
Fit for Yamaha XC 50 Vino Classic 4T 2013-2018
Fit for Yamaha XF 50 ie Giggle (C3) 4T E2 (15P/SA351) 2007-2011
Fit for Yamaha YW 50 F Zuma 50 4T 2012-2013
Fit for Yamaha YW 50 F Zuma 50F 4T 2014-2019
Fit for Yamaha YW 50 FX Zuma 50FX 4T 2014-2019
Fit for Yamaha YN 50 F Neos 4T E2 (5C3/SA40) 2009-2012
Fit for Yamaha YN 50 F Neos 4T E2 (2AC/SA46) 2013-2017
Fit for Yamaha YN 50 F Neos 4T E4 (2AC/SA611) 2018-2021
Fit for Yamaha NS 50 F Aerox 4T E2 (1GB/SA426) 2014-2017
Fit for Yamaha NS 50 F Aerox 4T E4 (SA601) 2018-2020

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)

Package Includes:
1x Cylinder
1x Piston
1x Piston Ring Set
1x 10mm Wristpin
1x Circlip(2)
1x Cylinder Base Gasket
1x Cylinder Head Gasket
1x Tensioner Case Gasket
2x Valve Stem Seals

(Comes exactly as pictured.)

Note:
Carefully compare to your old parts to be sure this is the correct part for your machine.

The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer Fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 88687576583

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2341 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Juan Muratalla
Louisville, US
★★★★★ 5
Excellent Quality and Reliable Performance from Anker’s 8-in-1 USB-C Hub
I’m really impressed with this Anker USB-C Hub with Ethernet (8-in-1). The build quality feels premium, setup was completely plug-and-play, and all ports work flawlessly with my laptop. The Ethernet connection is stable and fast, which has been perfect for work calls and large file transfers. I also love how compact and portable it is while still offering plenty of connectivity options. HDMI output looks great, USB ports transfer quickly, and the SD card reader is very convenient for photo and video work. Anker continues to deliver reliable products, and this hub is no exception. Highly recommended if you need a dependable all-in-one USB-C hub for productivity or travel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Tommy
Cuba, US
★★★★★ 5
Works great (quick test)
Just got this and tested and works great I attached to my MacBook with Ethernet and had a solid connection I tested my steam deck by plugging in Ethernet then adding HDMI then adding power and everything worked as it was plugged in I tested my Nintendo switch even though it clearly states it's not supported and it did not work at all. Even the power pass through did nothing. This is not even remotely a problem since it was advertised as such but I figured it was with a try and worth noting
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
K
Verified Purchase
kunoh
San Leandro, US
★★★★★ 4
Despite some caveats; this is a versatile hub
The Anker 555 8-in-1 USB-C Hub is a good buy if you’re looking for a hub from a reputable brand. I use it with an M1 Macbook Air, and it has been reliable so far. This hub has the following ports: 1 USB-C data port, 1 USB-C Power Delivery Port, 2 USB-A data ports, 1 HDMI port, an Ethernet port, and a microSD/SD card reader. Charging, PD (Power Delivery): To keep my Macbook charging, I connect a PD (Power Delivery) capable cable to the USB-C port meant for PD. (The other USB-C Port on this hub is meant only for data.) Once connected, the hub will eventually become warm to the touch, but this hasn’t caused any problems so far. Video Performance - no problems in 1440p I can connect my 1440p 144hz monitor to this hub’s HDMI port and my Macbook Air has no problem outputting a refresh speed of 144hz, as well the lower refresh rates of 120hz and 60hz. (I do not have a 4k monitor, so I could not test that.) USB-A Ports - works flawlessly I’ve tried keyboards, USB Drives, and even gaming Mice. All of these devices work as expected when connected to the USB-A Ports. Ethernet - Excellent speed I've connect this hub using an Ethernet cable to Gigabit speed Internet. The speed is just as fast as other computers on the network, and there is no slowdown at all, even with most of the ports on the hub being used. Gaming Keyboards with USB-C connectors - some issues. Some peripherals such as keyboards with USB-C connectors may not work on the USB-C ports on this hub. I tried using a Glorious GMMK Mechanical Keyboard and it did not work with this hub’s USB-C ports. (Of course you could try to simply use a USB-C to USB-A adaptor and then connect via the other USB ports on the hub instead.) Extension Cable - Use a Thunderbolt 4 cable Although this is totally optional, I like to use a small, 6-inch USB-C Extension cable to allow this hub to have more slack away from my laptop when connected. To allow this to work, I had to use a Thunderbolt 4 extension cable. I've tried other cables such as a Thunderbolt 3 extension cable. However, some of the attached devices on the hub were not recognized. Only the the Thunderbolt 4 extension cable allowed all my attached devices to be recognized. Other devices I have successfully connected an external SSD via the USB-C data port on this hub. I also regularly use an external DAC using the USB-A ports connecting to an IFI HIP DAC. Both of these devices work perfectly with this hub. Data transfer speed is rated at 10Gbs, though I haven't actually confirmed that. It works well enough for my purposes of transferring text documents and the occasional batch of vacation photos to my external SSD. Conclusion This hub from Anker is rated at 10Gbs which is plenty for me. But if you regularly transfer large amounts of data (like for video editing), I would instead recommend a powered docking station such as those from CalDigit. But for me, this portable hub does everything I need, and for much less money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2023
S
Verified Purchase
SamCat
Houston, US
★★★★★ 5
Almost perfect, could use one more USB-C Gen 2 port and a metal case instead of plastic.
Never really had any problems with Anker gear, I've come to trust the brand name. This little hub is almost perfect for use with my 2019 MacBook Pro, but where Anker really dropped the ball is by not adding one more USB-C port. I mean, there's two, but if one is dedicated to power devices only that doesn't really leave much room for expansion by only giving you one extra, I mean they were thoughtful enough to give you two USB-A ports. I do like that the USB-C and two USB-A ports are version 3.2 Gen 2 rated for up to 10Gbps transfer speeds versus Gen 1 at 5Gbps. The plastic casing does get hot, not sure if aluminum metal would be any better, but it would feel nicer, plastic just feels cheap. Also, a dark case with dark letter printing doesn't work because you can't see the writing, should have used lighter letter coloring. Otherwise, solid performer. I'll keep it along with my other one because having two hubs with a laptop is convenient so I don't have to always haul a hub around from place to place. PROS: • 1 USB-C port version 3.2 Gen 2 rated up to 10Gbps. • 2 USB-A ports version 3.2 Gen 2 rated up to 10Gbps. • Also includes, HDMI, Ethernet, SD and micro SD card ports. CONS: • Plastic casing, gets hot. • Should have one more USB-C port. • Port description lettering is too dark, gets lost against dark case color, should have used white or silver lettering instead. • No audio port.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2024
C
Verified Purchase
Customer
Port Orchard, US
★★★★★ 5
Does everything, super portable, robust construction
This is a super useful hub. I also used the Anker 341 7-in-1 hub for years, and it was very reliable for every feature, and the 555 8-in-1 looks to be of the same quality. The ethernet adapter is a great addition, and it works right away at 1G speeds on Linux 6.18 and even Android 16. I upgraded from the 341 to use this to connect to and configure devices from my desktop without having to drop my normal ethernet connection, and it is fantastic for that. It's a real swiss army hub, perfect travel size, and incredibly handy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2026

recommand products

Chainsaw Man - Makima (Hand Sign) Pop! Vinyl
18.00
1.1 Ct Marquise Lab Diamond • D VS1 IGI
311.00
0.94 Ct Marquise Lab Diamond • E VS2 IGI
221.47
Power Rangers: Zeo - Red Ranger Pop! Vinyl
20.00
1.09 Ct Marquise Lab Diamond • E VS1 IGI
296.50